Six steps to teach you to evenly paint the wall finish steps are important

2018-11-18 10:14:21

　　When choosing a wall paint, in addition to being beautiful and beautiful, you must also consider your own safety. After the renovation, many owners will complain that the paint on the wall of their home is uneven, uneven or have traces of touch up paint, which is probably caused by the carelessness of the decorator during the wall painting process. . Yichang environmental protection paint can be said that the owner's friend should choose environmentally friendly paint when choosing paint, and should also understand the steps required for the entire painting process. What should be paid attention to?

　　Steps and details can not be ignored, painting can be divided into 6 steps:

　　The first is to prepare for work.

　　Connect the door, window frame, furniture and paint to the color separation paper. Furniture such as wooden cabinets and partitions should be sealed with newspapers to prevent the paint from dripping and staining the furniture.

　　The second is toning.

　　For walls with color requirements, the area should be accurately calculated in advance, and the materials used should be evenly distributed at one time. Then it is primed to prevent the wall from diapering, to make the topcoat evenly and to prevent the water stains on the wood.

　　The third is roller coating construction.

　　The order of topcoat construction: first ceiling, lines, rear wall. The paint on the wall should be at least twice. The first coat can add 5%~10% water to facilitate the wall absorption. The second coat can be filled without water, and there is a certain interval between the first coat and the coating. When rolling, it is necessary to use both types of roller brushes at the same time. The coarse roller brush first and the fine roller brush immediately follow. Use a thick roller to spread the paint evenly on the wall, then use a fine roller to brush the place where the thick roller is brushed, and then re-brush it to make the wall paint fine and brush out the desired pattern.

　　The fourth is brush construction.

　　Use a brush to repaint the wall and corners where the brush is missing.

　　The fifth is to polish the wall.

　　When the wall paint is dry, sand the wall to sand the surface to reduce the brush marks on the wall and make the wall smoother. When grinding, be careful to feel the smoothness of the wall from time to time to determine where it needs to be polished. It should be noted that when grinding, try to use fine sandpaper. Generally, the softer putty (such as 821) uses 400~500 sandpaper. The texture is hard (such as wall lining, Yipingping) with 360~400. The number is good. Thoroughly clean the wall after polishing.

　　The sixth is to clean up and inspect.

　　Clean up the paint traces on the foot line and other places, check whether the color of the wall meets the design requirements, and whether the color of the painted surface is the same, in order to prevent the bottom, the leaking brush, the skin alkali powder, the foaming, the biting, the falling And other quality defects.