How to paint the concrete floor?

2018-11-22 08:09:34

　　1. Is it possible to use "cement floor paint" or general paint? Answer: It is not a cement floor paint, it is not a general paint. The professional name is: anti-pressure floor paint.

　　2, floor paint It refers to a set / group of paint or light to buy a bucket? Answer: It is a complementary product; it includes paints, solvents, curing agents and formulas.

　　3. Is it good to brush the paint or the roller? Answer: such as the corner, the door, the step with a brush, the central part and other large area with a roller.

　　4. How many times should I brush it? Answer: Two times, after the first completion, dry for 8 hours, then recoat. One thin and two thick.

　　5. How should I operate correctly? Answer: The main formula is not mistaken, and the other ones are not very complicated.

　　6. What color is recommended (dark/light) for cementing? Answer: The workplace is dominated by green. If it is home; light gray, beige is recommended. Light brown. The point is to pay attention to the closeness of the large pieces of furniture, such as furniture and door frames. In the end, it is mainly based on coordination. Supplement: How many square meters can a brush of ordinary 5 kg (6 liters) of paint be used? Reference value: coverage of 10 square meters per kilogram, thickness of 40 microns. Conventional household coatings are from 150 microns to 200 microns and can be up to 300 or more. In addition: use weight 1 (cooked tung oil): 2.5 (gasoline or pine perfume) to paint, evenly brush on the ground to enhance the adhesion of cement floor and putty. 3 mix the putty. Putty has two kinds of plaster and blood. The weight ratio of gypsum putty is 16 (gypsum powder): 5 (cooked tung oil): 1 (pine perfume): 6 (water), made together. The weight ratio of the blood putty is 16 (pig blood): 56 (large white powder), in order to enhance the wear resistance and waterproof performance, it is best to add some cooked tung oil properly and mix well. 4 After the putty is evenly mixed, it can be scraped with a blade to the ground of the paint, about 2 to 3 times, to the level of scratching. After the last time the putty is to be scraped, it should be sanded with sandpaper and then brushed with floor paint.