Rolling effect in the roller brush

2018-11-22 07:40:35

　　The roller brush manufacturer's professionally produced roller brush is durable in the market with its durability, high efficiency and intelligent design. The following Tongcheng Junying Brush Factory in Anhui Province explains the role of roller coating in the application.

　　Rolling is a widely used construction method in the construction of paintings. The roller coating saves time, labor, and operation, and the work efficiency is twice as high as that of the brush on the large-area plane. Various appearances such as masonry, concrete, plastering, embossing, metal mesh, and sound absorbing panels are suitable for roller coating.

　　Before rolling, the drum should be wetted with water or thinner, and the remaining liquid should be rolled onto the waste paper to marry the paint. When smearing, just immerse half of the roller brush into the guess, then roll it back and forth on the roller tray screed plate to make it evenly. When rolling, from top to bottom and bottom to top, press the "W" method to roll the paint on the bottom layer, then roll it horizontally. When the roller brush is dry, the outer surface of the roller is quietly treated. The width of each roll is approximately four times the length of the roll and one-third of the width of the roll is stacked to avoid roll marks at the intersection of the film. In order to ensure uniform coating and save paint, the two sides of the roller brush should be evenly applied during the roller coating. When the roller coating starts, the material is more, the force can be lighter, and then gradually increase. When working, the hands and shoulders should be as forceless as possible, and only by the flipping of the rollers. The reversal speed of the drum should not be too fast, to avoid paint splashing and affect the coating effect. The action is light when it is closed, and it is always from top to bottom. The card edge of the card is the same as the brush, and can use different sizes of rollers according to the size of the different areas.