Things to pay attention to when painting paint on the wall

2018-11-18 10:26:37

Paint on the wall Note 1: Prepare

Doors and windows (door and window decoration renderings) frame protection: the door, window frame, furniture and paint joints, paste color separation paper protection. Furniture such as wooden cabinets and partitions should be sealed with newspapers to prevent the paint from dripping and staining the furniture.

Care should be taken in the coloring of paints: walls with color requirements should be accurately calculated in advance, and the materials used should be evenly distributed at one time.

The wall primer is applied well: the wall should be primed before painting to prevent the wall from becoming damp, so that the color of the top coat is even, and the water stains on the wood board are prevented.

Note on the paint wall: the construction details are not too small

Roller painting: Topcoat construction sequence: first ceiling (ceiling decoration renderings), lines, rear wall. The paint should be applied to the wall at least twice. The first coat can be added with 5-10% water to facilitate the wall absorption. The second coat can be filled with no water, and there is a certain interval between the first coat and the coating.

Construction tool tips: When rolling, you need to use two kinds of roller brushes at the same time. The coarse roller brush first and the fine roller brush will follow. Use a thick roller to spread the paint evenly on the wall, then use a fine roller to brush the place where the thick roller is brushed, and then re-brush it to make the wall paint fine and brush out the desired pattern. Note that when rolling, do not stick too much paint on the roller, the rolling pressure should be uniform and the speed should be moderate. The horizontal, vertical, and oblique directions must be evenly rolled.

Brush repair: After painting with a roller brush, it is necessary to use a brush to paint the wall and the corner of the wall, especially the seam position of the wall and corner, wooden cabinet, partition, etc. and the corner of the wall. Where.

Polishing the wall: After the wall paint is dry, use sandpaper to polish the wall to reduce the brush marks on the wall and make the wall smoother. When grinding, be careful to feel the smoothness of the wall from time to time to judge where it needs to be polished, and the grinding intensity should be moderate and wide.

Paint on the wall Note 4: Construction cleaning and inspection

(1) Clean up the paint marks on the foot line and other places.

(2) Check whether the color of the wall meets the design requirements, whether the color of the painted surface is consistent, and does not allow quality defects such as bottoming, leaking brushing, skin alkali falling off, foaming, biting, and falling.

The quality of the paint on the wall directly affects the appearance of the home and affects the mood of the resident. How to paint the wall? What are the steps and precautions for painting? These problems have plagued many homeowners, especially those who have just been promoted to the home. After reading the six-part paint on the wall, I believe that everyone is no stranger to the paint on the home wall.