Analysis of the precautions on the paint on the wall

2018-11-17 20:17:44

　　Construction details should not be underestimated. Topcoat construction sequence: first ceiling, lines, rear wall. The paint on the wall should be at least twice. The first coat can add 5%-10% water to facilitate the wall absorption. The second coat can be filled without water, and there is a certain interval between the first coat and the coating. Construction tool tips: When rolling, you need to use two kinds of roller brushes at the same time. The coarse roller brush first and the fine roller brush will follow. Use a thick roller brush to evenly apply the paint to the wall, then use a fine roller brush to brush the place where the thick roller is brushed, and brush it again to make the wall paint fine and brush out the desired pattern. Note that when rolling, do not stick too much paint on the roller brush, the rolling pressure should be uniform and the speed should be moderate. The horizontal, vertical, and oblique directions must be evenly rolled. Brush repair: After painting with a roller brush, it is necessary to use a brush to paint the wall and the corner of the wall, especially the seams of the wall and the baseboard, the wooden cabinet, the partition, etc. corner. Polishing the wall: After the wall paint is dry, sand the wall to sand the surface to reduce the brush marks on the wall and make the wall smoother. When grinding, be careful to feel the smoothness of the wall from time to time to judge where it needs to be polished, and the grinding intensity should be moderate and wide.

　　The use of latex paint in home decoration is becoming more and more common. In addition to the common roll coating and spraying, the use of a brush (paint brush) for brushing is also a common construction method. When using the paint brush, pay attention to the following tips, which will make the whole construction process more efficient and effective. When applying latex paint, try to use artificial polyester, nylon brush or high quality wool brush to avoid problems from the source. A good brush, in your hand, should have a good feeling: not slippery, not rough, comfortable and comfortable. When choosing a paint brush, you should pay attention to the following points: The quality of the wool brush with the single-tailed craftsmanship is the best. The ends of the bristles can flex to some extent and can easily bounce back to their original shape. The size, type and quantity purchased should be commensurate with the scale of the project. In general, you should have both a size and a brush. The bristles may be flat, pointed, or angled. It depends on whether there are some special shapes in the project.