How to use the roller properly?

2018-11-17 19:49:17

　　1. Before using the roller brush, wash the floating hair with water first, dip the fluff with water or thinner and dry the water, roll off the excess liquid on the waste paper and pick up the paint.

　　2. Dip the half of the roller brush into the material when immersing the paint, then roll it back and forth on the special roller tray screed plate several times to make the roller brush evenly distributed 360 degrees.

　　3. When rolling, apply the roller brush from top to bottom and then bottom up. Press the “W” shape to roll the paint on the base layer, then roll it horizontally. When the roller brush is dry, it will just roll. The surface is gently rubbed, the width of each roll is about four times the length of the drum, and the one-third of the width of the drum is overlapped, so as to avoid the formation of rolling marks at the intersection of the coating film, in order to ensure uniform coating, save paint, roll When applying, the two ends of the roller brush should be evenly applied. When the roller coating starts, the material is more, the force can be slightly lighter, and then gradually increase. When the hand and shoulder are used as much as possible, the coating is performed by the rollover of the roller. The rotation speed should not be too fast, so as to avoid splashing of the paint and affecting the coating effect. The movement should be light when the edge is closed. It is always performed from top to bottom. The technique of the card edge is the same as that of the brush coating. Different sizes of roller brushes can be used according to the size of different areas. .

　　4. After the roller brush is finished, clean the roller brush. Remember to wash the water while the roller brush is still wet, and place it in a ventilated place to dry it for further use. The roller brush can be repeated without loss. use.