Roller brush in industrial applications

2018-11-17 19:30:06

　　The application of roller brushes in the industry is mainly manifested in four aspects: dustproof, polishing, cleaning and grinding. The specific use of each brush is detailed below.

　　The main purpose of the dust-proof brush is to install it at the entrance and exit of industrial equipment, assembly lines, doors and windows, etc., to prevent dust from drilling through these gaps, contaminating equipment and products, so the requirements for brushing are highly flexible. The surface of the brush wire is well lubricated, and it is also preferable to have an antistatic function. Brush, brush factory, industrial brush, brush roller.

　　The polishing brush is mainly used for deburring and fine grinding of the surface of the object to be parabled. Therefore, the type and characteristics of the brush wire should be determined according to different requirements. If the steel plate with strong hardness needs to be surface plated and polished, The most ideal brush wire should be a bronze wire. If it is a general metal material for surface rusting and deburring, then a steel wire with a good hardness can be used;

　　Cleaning brush is the most commonly used industrial roller brush. It is generally used for fruit and vegetable cleaning and industrial cleaning and dust removal and decontamination. And aging, long-term operation is not easy to deform, if the brushing performance is not good, when the object is in a certain position for a long time, it will cause the brush roller to appear groove, destroying the function of the roller brush, and even causing the entire brush Roll scrapping;

　　Grinding brushes are used less. Generally, industrial grinding will be done directly with grinding tools such as grinding wheels. These are not within the scope of industrial brushes. However, for the sanding of textile industry, it is necessary to use abrasive wire brushes containing silicon carbide. The mesh (density) of the silicon carbide contained in the roller and the abrasive wire is appropriately adjusted in accordance with the strength of the fabric to be ground and the effect of grinding.